Intimidation. It’s your main form of weaponry while facing the heroes, because it gives you full control. When your enemies fear you, they are more likely to make fatal mistakes.
Your Dark Drake Armour is as dark as your intentions, hardened by the evil magic your subjects provide. As you withdraw your sword, sizing up the quivering soldier who feels brave enough to stand against you, you begin to laugh. This will be a very brief fight--if you can even call it that. The little man looks barely strong enough to hold up his hammer.
DETAILS
Epic Armoury’s Dark Drake Shoulderplates are a set of two shoulder guards with spaulders, pauldrons and besagues. The spaulders have four scale-like ridged metal plates--or lames--overlaying one another to provide laminate protection of the upper arms. Overlaying the spaulder is a large pauldron, which provides additional protection to the shoulder joint and armpits. Besauges (small round convex metal shields) tied onto the spaulders with leather cords add further protection to the armpits. The shoulderplates are fastened with leather straps around the biceps and at the shoulder blade, attaching to a breast- and backplate. Epic Armoury breast- and backplates can be purchased separately and have fittings for mounting the shoulders.
The Dark Drake Shoulderplates are designed to match Epic Armoury’s Dark Drake Armour, but is fully usable with other Epic Armoury metal products, giving you the freedom to customize your character’s costume. Made of 1 mm thick galvanized mild steel and top-grain leather straps and fittings, this armour piece is built to withstand the abuse of a LARP or reenactment with regular leather and metal armour care.
Available in size Medium/Large/X-Large.
HISTORY
- Plate armour became more popular as firearm technology became more prevalent during the 13th century
- Historically designed with sculpted ridges and overlapping plates to provide reinforced protection and to deflect attacks on a chaotic battlefield
- An evolution of the spaulders during the 15th century
- Made from 1mm/19 gauge thick mild steel
- -Rolled edges with no sharp edges
- Straps and fittings made from top-grain leather
- Hand made, welded pieces for maximum durability
- -Epic Armoury Dark oxidization resistant coating
Epic Armoury Dark products are specially treated to resist rust, but should still be treated with oil and kept in dry storage. All our metal armours contain leather parts that need regular maintenance using leather-care products to keep the leather from drying out.
Cleaning
If your armour does get wet, it is important that you dry it thoroughly as soon as possible.
After handling, wearing, or after six months of storage or display, all metal should be wiped with a clean cloth. Lightly oil the clean surface with a quality machine or mineral oil. Alternatively, you can apply a coating of wax to the entire surface of exposed metal. Allow the wax to dry for a couple of hours and then buff it lightly with a soft cloth.
Rust-Prevention and Removal
Store your armour is a dry place and check it every couple of months for signs of rust. If any is found, remove it by gently rubbing the affected spot with a mildly abrasive pad dipped in paste wax, oil, or water-displacing liquid.
Leather Straps and Fittings
Clean by removing dirt with a hard brush, then gently rub on leather soap with a clean, damp cloth until the leather appears clean. Remove soap with a separate damp cloth to wipe away any soap residue and then use a dry cloth to wipe away any remaining water from the leather.
You should always condition leather after cleaning, since the soap will have removed some of its natural oils. Treat the leather with mink oil, olive oil, or beeswax polish with a clean cloth, gently rubbing a small amount of oil or polish in circles into the leather. Allow the leather to soak in the oil before wiping the leather with a final clean cloth to remove any excess residue.
What LARPers are saying
f