Soldier Arm Protection

Write a review
$100.00 CAD
excl. taxes

Practical Protection for the Arms Epic Armoury’s Soldier Arm Protection is a complete set of vambraces, rerebraces, and elbow cups. Designed to protect the outside of the entire arm, this handmade...

SKU: 20041766
Availability : In Stock Pre order Out of stock

Color: Polished Steel

Polished Steel

Size: XXL/3XL

S/M
L/XL
XXL/3XL

visamasterpaypal
Description

Practical Protection for the Arms

Epic Armoury’s Soldier Arm Protection is a complete set of vambraces, rerebraces, and elbow cups. Designed to protect the outside of the entire arm, this handmade armour is made from 1mm steel and connected by chrome leather straps and strong rivets. The elbow cups--also known as couters--protect the elbow joint thanks to its rounded shape and reinforced ridges. The inside of the elbow features a cupped flange to deflect blows. The upper arm is protected by the half-rerebrace, while the lower arm is protected by the vambrace.

The Soldier’s Arm Protection has rolled edges that form ridges around the rims. Three chrome leather straps are used to secure the armour to your arm, and the top of the rerebrace is attached to the gambeson using canvas ties through a leather plate. With regular leather and metal care you can expect this quality made armour to last for a long time!

Available in Polished Steel and Epic Dark and comes in sizes S/M, L/XL, XXL/3XL.

Inspired by Renaissance History

  • 15th- and 16th-century European plate armour was attached to gambesons using arming points, which are utilized in this product’s design
  • Plate armour became more popular as firearm technology became more prevalent during the 13th century
  • The elbow cup is referred to as a couter or an elbow cop
  • Made from 1mm/19 gauge thick mild steel
  • Rolled edges with no sharp edges
  • Straps and fittings made from top-grain leather
  • Hand made, welded pieces for maximum durability
  • Polished steel finish

Epic Armoury metal works products should still be treated with oil and kept in dry storage. All our metal armours contain leather parts that need regular maintenance using leather-care products to keep the leather from drying out.

Cleaning

If your armour does get wet, it is important that you dry it thoroughly as soon as possible.

After handling, wearing, or after six months of storage or display, all metal should be wiped with a clean cloth. Lightly oil the clean surface with a quality machine or mineral oil. Alternatively, you can apply a coating of wax to the entire surface of exposed metal. Allow the wax to dry for a couple of hours and then buff it lightly with a soft cloth.

Rust-Prevention and Removal

Store your armour is a dry place and check it every couple of months for signs of rust. If any is found, remove it by gently rubbing the affected spot with a mildly abrasive pad dipped in paste wax, oil, or water-displacing liquid.

Leather Straps and Fittings

Clean by removing dirt with a hard brush, then gently rub on leather soap with a clean, damp cloth until the leather appears clean. Remove soap with a separate damp cloth to wipe away any soap residue and then use a dry cloth to wipe away any remaining water from the leather.

You should always condition leather after cleaning, since the soap will have removed some of its natural oils. Treat the leather with mink oil, olive oil, or beeswax polish with a clean cloth, gently rubbing a small amount of oil or polish in circles into the leather. Allow the leather to soak in the oil before wiping the leather with a final clean cloth to remove any excess residue.

What LARPers say about it



f