You are laughing too loud. You realize it must be scaring your enemy, because no one wants to face you on the frontline anymore. They think you are crazed. Maybe you are, because the adrenaline of being in a battle has left you feeling drunk with exhilaration.
If no one will come to you, it’s time to bring the fight to them! One poor soldier desperately strikes at you and you feel the thud of his sword against your Viking Mask Helmet, but it hardly makes a scratch. You see the terror in his eyes as your laugh fills the field and you bring the strength of your axe down upon him.
You are Raynor Ironshood. Let them fear you. Let them all fear you.
Epic Armoury’s Viking Mask Helmet is a skull cap helmet inspired by the Vikings of the 10th century. The “spectacle” guard over the eyes provides great protection for the face while still allowing the wearer good vision. Reinforced with rivets, a combed apex, and a steel band around the rim, you can expect this helmet to stand up against the Roman Empire and its inferior states.
Secure the Viking Mask Helmet by tightening the leather strap beneath the chin, keeping the helmet in place. Made of 1 mm thick mild steel and top-grain leather straps and fittings, this armour piece is built to withstand the abuse of a LARP or reenactment with regular leather and metal armour care.
Available in sizes Medium and Large.
- Design is based on the only known complete Viking helmet in existence, located in central Norway dating to the 10th century
- Historically made from iron
- Likely developed to mimic the spangenhelm
- Made from 1mm/19 gauge thick mild steel
- Rolled edges with no sharp edges
- Straps and fittings made from top-grain leather
- Hand made, welded pieces for maximum durability
- Polished steel finish
Epic Armoury metal works products should still be treated with oil and kept in dry storage. All our metal armours contain leather parts that need regular maintenance using leather-care products to keep the leather from drying out.
If your armour does get wet, it is important that you dry it thoroughly as soon as possible.
After handling, wearing, or after six months of storage or display, all metal should be wiped with a clean cloth. Lightly oil the clean surface with a quality machine or mineral oil. Alternatively, you can apply a coating of wax to the entire surface of exposed metal. Allow the wax to dry for a couple of hours and then buff it lightly with a soft cloth.
Rust-Prevention and Removal
Store your armour is a dry place and check it every couple of months for signs of rust. If any is found, remove it by gently rubbing the affected spot with a mildly abrasive pad dipped in paste wax, oil, or water-displacing liquid.
Leather Straps and Fittings
Clean by removing dirt with a hard brush, then gently rub on leather soap with a clean, damp cloth until the leather appears clean. Remove soap with a separate damp cloth to wipe away any soap residue and then use a dry cloth to wipe away any remaining water from the leather.
You should always condition leather after cleaning, since the soap will have removed some of its natural oils. Treat the leather with mink oil, olive oil, or beeswax polish with a clean cloth, gently rubbing a small amount of oil or polish in circles into the leather. Allow the leather to soak in the oil before wiping the leather with a final clean cloth to remove any excess residue.